| Forum Home > Pram Restoration > removing mould? | ||
|---|---|---|
|
Member Posts: 10 |
hi all, just bought old wilson coachbuilt (haven't recieved it yet!),the inside of the navy vinyl bed part is full of a rusty looking mould,also interior of the hood,how best to go about fixing this problem please without damaging it? all help greatly appreciated! maureenxxx | |
| ||
|
Site Owner Posts: 201 |
Maureen use some cream cleanser like Cif and a sponge washing up pad, the type with a nylon scourer on one side. As long as you don't press too hard around the seams of the hood, you can't do a lot of damage and it should remove anything that is going to come off. I haven't never had a problem with mould on a navy lining, but I have had it with a camelia lining when it usually appears as mildew, and then very often nothing removes it. So good luck with it
| |
--SandraCoachbuiltPrams
| ||
|
Member Posts: 10 |
thanks sandra, i'll try that, maureenxxx | |
| ||
|
Member Posts: 10 |
sandra,the pram came today & there's no mould on it,it was just dirt! i think with a little work to it overall,it should come up lovely! maureenxxx | |
| ||
|
Site Owner Posts: 201 |
Oh brilliant Maureen, can't wait to seeit when it has had a good scrub with my old friend the cream cleanser, I just love that stuff! It is a prammies best pal I think.
| |
--SandraCoachbuiltPrams
| ||
|
Member Posts: 10 |
yes,i was so pleased it was just dirt! sandra,do you know anywhere i could get a new rubber grip for the handle,it's a proper thick white rubber type,but sadly it's perished & all bits missing off it? thanks,maureenxxx | |
--
| ||
|
Site Owner Posts: 201 |
I'm afraid that I have never managed to find one of the rubby hand grips up to now Maureen, if I do I'll put it into the PramSuppliers/Services section, that is where I would normally put this sort of info. | |
--SandraCoachbuiltPrams
| ||